Indicators
Controllers
Auto Manual Station
Flow Totaliser
Scanners
Data Loggers
Alarm Annunciators
RTD / PT100
Transmitter
Thermocouple
Transmitters
Pressure
Transmitter
Humidity Transmitter
Signal Conditioner
Signal Isolator
Distributor

Weight Indicator &
Controller

Air Pollution Control
Timer
Power Supplies
Industrial Printer
Thermocouple & RTD sensors
Software

 

Products
 ISO 101/102     SIGNAL ISOLATOR / DISTRIBUTOR
 
  • Current loop isolator
  • Passive - Loop powered I/O
  • Single or Dual output
  • Optical isolation
  • Narrow Profile - greater packing density
  • Front panel adjustment
  • 35 mm DIN rail mounting

 

 Key Specifications
 
Input : 4 to 20 mA
Output:  4 to 20 mA
Load resistance: 550W max with 24V DC loop supply
Power supply:    Passive, Loop powered input and output 
   
 

Signal Isolator ISO-101/102 (ISO-101 single output and ISO-102 dual output) provides total signal isolation between a non-isolated transmitter and a receiving device. This eliminates faulty readings in process measurement and control equipment caused by ground loops, motor noise, and other unpredictable electrical interference. 

When the output from one transmitter needs to be isolated and sent to two different locations, ISO102 with dual output provides ideal solution and acts as a splitter. These isolators operate on the principle of optical isolation and provide high isolation between the input circuit and the output. 

External power supply is not required by these isolators, the input circuit is powered from the input 4 to 20mA signal and the outputs are powered by the output loop power provided by the receiving instrument. The isolators have individual output adjustment potentiometers accessible from the front panel. 

 

Copyright Micro Systems & Controls, Kolkata , India 2005
Site designed & hosted by Calport Technologies